Valve Stem Seal (OE Type) (Qty. 5) (Viton) - Pos OE 6MM Metal Clad - Enginetech S475V-5

Valve Seal - OE Type - S475V-5

Dimensions

Package detail

Competitive interchange

Product notes

Enginetech Rebuilder's Valve Stem Seals
Enginetech’s high quality valve stem seals are available in three categories, Premium Positive, Premium Umbrella and OE.
Enginetech Premium Positive seals are metal clad with high-temp Viton® elastomer sealing lips. All Premium Positive seals are designed to work with valve stems from 0.005” under to 0.015” over. Most of these seals can be used as a universal fit on normal guide sizes such as 0.482”, 0.500”, 0.512”, 0.530”, 0.562, 0.625” etc. Stem diameters range from 8.00mm to 3/8”.
Enginetech Premium Umbrella seals are high-temp Silicone with garter springs to retain stem interference. All Premium Umbrella seals are designed to work with valve stems from 0.005” under to 0.015” over. Most of these seals can be used as a universal fit on normal stem sizes such as 8.00mm, 5/16, 11/32” and 3/8”.
Enginetech OE type seals are designed as a direct replacement for the OE part. The OE type seals are recommended for standard OE diameter valve stems only. We use only OE type materials for these seals including Viton©, polyacrylate and nylon. While many competitors use low quality nitrile materials Enginetech uses only OE material or better. We’ve got you covered with a full line of seals for your rebuilding requirements.

Also fits